Description:

The Chlorine Injector Station (CIS) adds chlorine to water used for Recoil Hose Flush Stations, Reverse Osmosis Systems, and other applications that have stable water flow.

The CIS has a solution tank, injector pump, mixing changer, control panel, and other components which inject chlorine solution into water as it flows through the station. A selector switch disables the pump to interrupt the chlorination.

The CIS is adaptable to a wide range of flow rates, but there must be a stable flow for each application set-up.  Solution content mixture in water is adjustable via pump settings.

The CIS is available in a stand alone station (Model 301) and as a special station (Model 302) to be used only with the Edstrom Automatic Recoil Hose Flush Station (Model 5480).

Features:

• Simple, effective in-line chlorinator for stable flow applications
• All stainless steel piping construction with other wetted parts of non-corrosive plastic or stainless steel
• Mixing chamber to assure thorough dispersion of chlorine solution
• Easy, convenient drain and fill provisions for solution tank
• Selector switch for untreated or chlorinated water
• Suitable for wide range flows(0.25-5.0 gpm) and pressures up to 75 psi maximum
• UL LISTED

 Benefits:

• Simple safe operation - uses household bleach
• Trouble-free with low maintenance
• Readily adapts to in-line installations
• Adaptable for connection to separate controller
• Easy adjustment of chlorine concentration
• Low operating costs
• Compact wall-mounted panel - no floor space required

Application/Operation:

The Chlorine Injector Station (CIS) is available in two models. Both require a constant water flow rate since the CIS does not compensate for flow variations. The CIS is used with the Edstrom Combo Flush Station to provide chlorinated water at 20-30 ppm for sanitizing rack manifolds and recoil hoses. With this application the CIS Model 301 is plumbed into the water supply line as shown in Figure 1.

Figure 1. Model 301 with Combo Station

The CIS can also be used in the Reverse Osmosis System permeate line. Installed between the RO machine and the storage tank, the CIS adds low levels of chlorine to the animal drinking water (see Figure 2). For this application the station can be supplied with a high capacity 35 gallon [132 L] solution tank as shown.

Figure 2. Model 301 with RO System

The stand-alone CIS Model 301 has a control panel which operates the pump when it senses water flow through the station. The CIS Model 302 can only be used with the Edstrom Model 5480 RHFS which has the GP Controller to handle the operation of the CIS (see Figure 3). A hard wire 115 VAC electrical connection is required to power the CIS.

Figure 3. Model 302 with Recoil House Flush Station

After the initial set-up, the CIS requires very little attention. Periodic chlorine solution refills are all that is necessary. The solution tank is filled through a port on the tank's lid. A quick check of the chlorine concentration of the treated water will assure the CIS is operating correctly.